​
Purpose

The purpose of the token-min-hold-time rule is to reduce trade volitility by preventing transfers of tokens for a number of hours after ownership is acquired, either via minting or transfers. This rule allows developers to specify a number of hours, up to 43830 (5 years), that each tokenId must be held for.

​
Scope

This rule works at a token level. It must be activated and configured for each desired token in the corresponding token handler.

​
Data Structure

The rule is a uint32 variable for number of hours each individual token must be held by the owner of that tokenId, up to a maximum of 43830 hours or 5 years.

/// ******** Token Min Hold Time ********
    struct TokenMinHoldTime {
        uint16 minHoldTime; /// from 0000 to 43830
    }
see RuleDataInterfaces

Additionally, each starting unix timestamp for the ownership of the tokenId is stored in a mapping inside the handler.

/// Minimum Hold time data
    mapping(uint256 => uint256) ownershipStart;
see ERC721Handler

​
Configuration and Enabling/Disabling

  • This rule can only be configured in the handler by a rule administrator.
  • This rule can only be set in the asset handler by a rule administrator.
  • This rule can only be activated/deactivated in the asset handler by a rule administrator.
  • This rule can only be updated in the asset handler by a rule administrator.

​
Rule Evaluation

The rule will be evaluated with the following logic:

  1. The handler determines if the rule is active from the supplied action. If not, processing does not continue past this step.
  2. The handler evaluates the account’s ownershipStart to check that it is greater than zero.
  3. The handler passes the account’s ownershipStart and period to the processor.
  4. The Processor evaluates if the current time minus ownershipStart is less than period. If it is the transaction reverts.
  5. Rule processing differs slightly for the BUY and SELL type. If it is determined that the msg.sender is a contract, both BUY and SELL rules are checked if they are active and if they are the rule is applied to the transaction.

The list of available actions rules can be applied to can be found at ACTION_TYPES

see ERC721RuleProcessorFacet -> checkTokenMinHoldTime

​
Evaluation Exceptions

  • This rule doesn’t apply when a treasuryAccount address is in either the from or the to side of the transaction. This doesn’t necessarily mean that if an treasury account is the one executing the transaction it will bypass the rule, unless the aforementioned condition is true.

​
Revert Message

The rule processor will revert with the following error if the rule check fails:

error UnderHoldPeriod();

The selector for this error is 0x5f98112f.

​
Create Function

Adding a token-min-hold-time rule for the supplied actions is done through the function:

function addTokenMinHoldTime(
            address _appManagerAddr,
            uint32 _minHoldTimeHours
        ) external ruleAdministratorOnly(_appManagerAddr)
        returns (uint32);
see RuleDataFacet

The add function will return the protocol ID of the rule.

​
Parameters:

  • _appManagerAddr (address): the address of the application manager to verify that the caller has rule administrator privileges.
  • _minHoldTimeHours (uint32): Number of hours each tokenId must be held for.

​
Parameter Optionality:

There is no parameter optionality for this rule.

​
Parameter Validation:

The following validation will be carried out by the add function in order to ensure that these parameters are valid and make sense:

  • _minHoldTimeHours is greater than zero.
  • _minHoldTimeHours is less than MAX_HOLD_TIME_HOURS.
see RuleDataFacet

​
Other Functions:

  • In Protocol Rule Processor:
    • Function to get a rule by its ID: 
      function getTokenMinHoldTime(
            uint32 _index
        )
        external
        view
        returns
        (NonTaggedRules.TokenMinHoldTime memory);
    • Function to get current amount of rules in the protocol: 
      function getTotalTokenMinHoldTime() public view returns (uint32);
  • In Protocol Rule Processor:
    • Function that evaluates the rule: 
      function checkTokenMinHoldTime(
            uint32 _ruleId,
            uint256 _amountToTransfer
        )
        external
        view;
  • in Asset Handler:
    • Function to set and activate at the same time the rule for the supplied actions in the asset handler:
    function setTokenMinHoldTime(ActionTypes[] calldata _actions, uint32 _minHoldTimeHours) external ruleAdministratorOnly(_appManagerAddr);
    • Function to activate/deactivate the rule for the supplied actions in an asset handler: 
      function activateTokenMinHoldTime(ActionTypes[] calldata _actions, bool _on) external ruleAdministratorOnly(appManagerAddress);
    • Function to know the activation state of the rule for the supplied action in an asset handler: 
      function isTokenMinHoldTimeActive(ActionTypes _action) external view returns (bool);
    • Function to get the rule Id for the supplied action from an asset handler: 
      function getTokenMinHoldTimePeriod(ActionTypes _action) external view returns (uint256);

​
Return Data

This rule doesn’t return any data.

​
Data Recorded

This rule requires the unix timestamp for each tokenId each time the ownership of the token is transferred.

NOTE: When this rule is updated and/or deactivated, the recorded ownership data is cleared. When the rule is reactivated or set to a new ruleId, the recorded data will start in its default state. This means that the rule will only apply to tokens in which the ownership began after the current implemented version of this rule was applied.

​
Events

  • event AD1467_ProtocolRuleCreated(bytes32 indexed ruleType, uint32 indexed ruleId, bytes32[] extraTags):

    • Emitted when: the rule has been created in the protocol.
    • Parameters:
      • ruleType: “TOKEN_MIN_HOLD_TIME”.
      • ruleId: the index of the rule created in the protocol by rule type.
      • extraTags: the tags for each sub-rule.

  • event AD1467_ApplicationHandlerActionApplied(bytes32 indexed ruleType, ActionTypes action, uint32 indexed ruleId):

    • Emitted when: rule has been applied in an asset handler.
    • Parameters:
      • ruleType: “TOKEN_MIN_HOLD_TIME”.
      • action: the protocol action the rule is being applied to.
      • ruleId: the ruleId set for this rule in the handler.

  • event AD1467_ApplicationHandlerActionActivated(bytes32 indexed ruleType, ActionTypes actions, uint256 indexed ruleId)

    • Emitted when: A Minimum Hold TIme rule has been activated in an asset handler:
    • Parameters:
      • ruleType: “TOKEN_MIN_HOLD_TIME”.
      • actions: the protocol actions for which the rule is being activated.
      • ruleId: a placeholder of 0 will be passed for ruleId

  • event AD1467_ApplicationHandlerActionDeactivated(bytes32 indexed ruleType, ActionTypes actions, uint256 indexed ruleId)

    • Emitted when: A Minimum Hold TIme rule has been deactivated in an asset handler:
    • Parameters:
      • ruleType: “TOKEN_MIN_HOLD_TIME”.
      • actions: the protocol actions for which the rule is being deactivated.
      • ruleId: a placeholder of 0 will be passed for ruleId

​
Dependencies

  • This rule has no dependencies.
Token Max Daily TradesToken Min Tx Size